WARNING:
This product contains nicotine.
Nicotine is an addictive chemical.
SHOPPING CART: (0) ITEMS
The Accumulator Cloud Crew Coil Tool
Accumulator Coil Tool

The Accumulator Cloud Crew Coil Tool

review
5
0
5
Your Price: $9.99
In Stock
Part Number:CV-CC-COILTOOL
Cloud Crew Coil Tool, The Accumulator

Step up your coil game with this handy tool! Easily make precise and accurate micro coils for your favorite RDA in a variety of diameters.

Comes with 5 Rods in 1mm, 1.5mm, 2mm, 2.5mm, 3mm
5 different tops for the different size rods
Adjustable to accommodate different gauges of wire
Bottom unscrews to store the different rods

Cloud Crew® and Crusty Clouds® are registered trademarks of CTC, Inc. & Vapin in the Cape.  All rights reserved.
5 Stars
Easiest coils I've ever made.
If your new to building, or even if your experienced, This tool makes it so much easier. I bought one for my Girlfriend and now im the one using it! twist 2, 3, 4, 5, and done. 5 wraps on a perfect coil. Every time. Get this to speed up your builds or help a new person learn!
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by:  from . on 5/10/2015
5
5 Stars
Nice Tool
Coiling made easy. Wether you're new to vaping or an advanced one. Pretty easy to use and the quality is pretty nice for the price. It's always nice to have one, specially if you are getting ready to dive down into the rebuildable side of vaping. And there are tons of videos on how to use one. Just remember not to put too much pressure when twisting your coils. Just let the coils twist itself around the rod as you turn it. Putting too much pressure would smoosh the coil on top of each other.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Jonesboro, AR. on 4/10/2017
5
5 Stars
Organized
Simple , well packaged , clutter free . Good kit to have around
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Naples. on 4/20/2017
5
4 Stars
_
This kit is appropriate for small atomizers and coils. This style has been around for a while now and these really do make DIY coils a snap. I do wish it had larger mandrels for the more modern rebuildables today. This kit goes from 1.0mm to 3.00mm in .5mm steps. I don't think I ever made a 1mm coil. In fact many years ago on my first kayfun it was a 2mm. Today 4mm ID is the smallest coil I make. The 3mm mandrel might be useful for some multicoil rebuildables with limited coil space. This thing was added to my order for free and well for free, this thing is marvelous! If it's your first one and you are new to DIY, this is an inexpensive starter tool.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Alabama. on 8/30/2018
4

Reward Points

10 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items

Earn Rewards!