5 Pack genuine Kangertech horizontal coil empty refillable cartridges - cartomizers, refills - includes:
- 5 Genuine Kanger horizontal coil cartomizers (5 pack)
- Empty (add your own vape juice / eliquid)
- 808D Thread
- For V2 Cigs, Hathi Classic and any 808D thread battery
PLEASE NOTE: Vape Pen require maintenance. The battery contact needs to be kept clean and dry. Horizontal coil cartomizers can be refilled several times until you get a burnt taste with each inhale. When that happens, simply dispose the old horizontal coil cartomizer and use a new one.
To refill the empty horizontal coil cartomizer, choose from the following 2 methods:
- Method 1: Remove the white top cap from the horizontal coil cartomizer and fill it with e liquid. Do not overfill.
- Method 2: Use the protective transparent plastic cap of the horizontal coil cartomizer that has no pin at the center (the horizontal coil cartomizer comes with 2 transparent plastic caps protecting either sides of the horizontal coil cartomizer). Fill the cap 1/3 with liquid, insert the horizontal coil cartomizer in the cap thread first, and press gently allowing the liquid to be absorbed into the horizontal coil cartomizer. When all the liquid as been absorbed, remove the cap from the horizontal coil cartomizer, dry the thread, and the horizontal coil cartomizer is now ready for use. Do not overfill. Horizontal coil cartomizers can be refilled several times.
A reduction in flavor and vapor indicates that your horizontal coil cartomizer is empty and needs to be refilled.
Replace the horizontal coil cartomizer after using 10 ml of vape juice or when you have a burnt taste.
The 808D thread horizontal coil cartomizers are compatible with any KR808D battery, including V2 Cigs, Bloog, Vapornine, Volt / Smokeless Image, Vapor 4 Life (V4L), E-Smoke, Premium, Halo G6, E-Smoker Online, South Beach, Bull Smoke, Mistic, LeCig D-1, Eonsmoke, Magic Mist, Eversmoke.
PLEASE READ THIS MANUAL CAREFULLY BEFORE FILLING YOUR HORIZONTAL COIL CARTOMIZERS.
USING YOUR 808D1 HORIZONTAL COIL CARTOMIZER:
1. Unpack the cartomizer. Remove plastic sleeve and rubber end caps
2. Remove the white top cap from the cartomizer and fill it with vape juice. Do not overfill. Alternatively use the protective transparent plastic cap of the cartomizer that has no pin at the center (the cartomizer comes with 2 transparent plastic caps - or cups - protecting either sides of the cartomizer, normally the cap without pin is on the mouth side), fill the cap to 1/3 with vape juice, insert the cartomizer in the cup thread first, and press gently allowing the vape juice to be absorbed into the cartomizer. When all the vape juice has been absorbed, remove the cap from the cartomizer, dry the thread and the cartomizer is now ready for use. Do not overfill. Cartomizers can be refilled several times.
3. Screw the filled cartomizer onto a fully charged battery. This will put your KR808D1 vape pen into stand-by mode.
4. Don't tilt your Vape Pen past horizontal to avoid any vape juice from leaking out of the cartomizer. Make sure to wipe any excess vape juice from the cartomizer before placing in your mouth.