X Cube II Mini is the mini version of X Cube II. As one of the most
accurate temperature-control mods, the X Cube II Mini features three new
functions: intelligent coil recognition, adjustable temperature
coefficient of resistance, and adjustable initial resistance, which are
designed to bring your vaping experience to the next level. The new
features are added to enhance the accurateness of temperature control,
and produce unexpected consistency and taste of every puff. It has 75w
maximum output, Bluetooth 4.0 technology, and a customizable LED that
potentially illuminates in up to 16 million colors. And there are many
more functions waiting for you to discover.
- Charging Time: about 3 hours
- Output Power: 1w-75w
- Output Voltage: 0.35v-9v
- Resistance Range: 0.6 Ohm-3.0 Ohm (Temp Mode) 0.1 Ohm-3.0 Ohm (Watt Mode)
- Temperature Control Range: 200 Degrees F-600 Degrees F/ 100 Degrees C-315 Degrees C
- Material: Zinc Alloy and Stainless Steel
- Max Discharge Current: it should be less than 30A when the atomizer resistance is 0.1 Ohm
- Upgrade Firmware
Coil Recognition: Under TC mode, the X Cube II Mini can recognize your
coils made of Nickel 200, Titanium, and Stainless Steel. The default
temperature sensing coil material is Nickel 200. Titanium and Stainless
Steel coils are also available.
Coefficient of Resistance: Temperature Coefficient of Resistance is one
of the main parameters to characterize the change in resistance. X Cube
II Mini allows you to adjust TCR values of Nickel 200, Titanium and
Stainless Steel in different ranges, thus further improving the accuracy
of temperature control and bring you the best taste.
Initial Resistance: As temperature sensing coils tend to be sub-ohm, the
poor contact problem can make a big error, in a way that is not evident
when an atomizer is being used for wattage control only. This function
is designed to ensure your resistance on the load remains the same.
There is an inherent risk with the use of any and all rechargeable
batteries in any circumstance. Vapin in the Cape and any and all of Vapin in the Cape's
parent and subsidiary companies are not responsible for damage if there
is any modification of the batteries/chargers in any form or shape
(including pack making). Vapin in the Cape and any and all of Vapin in the Cape's parent
and subsidiary companies are not responsible for any damage caused by
the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion
Polymer) and any rechargeable batteries and chargers.
special caution when working with Li-ion (Lithium-ion), LiPo
(Lithium-ion Polymer) and any rechargeable cells, as they are very
sensitive to charging characteristics and may explode or burn if
mishandled. Make sure the user has enough knowledge of Li-Ion
(Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in
charging, discharging, assembly and storage before use. Always charge
in/on a fire-proof surface. Never leave charging batteries unattended.
Do not use any rechargeable battery as well as any battery charger if
any visible damage is present, as well as if the cell or charger has
been stressed through mishandling, accidental or otherwise, even if
damage may not be visible. Always store and transport rechargeable cells
in a safe, non-conductive container in a controlled environment.
Dispose of all battery cells and chargers in accordance to local laws
Vapin in the Cape will not be held responsible or liable
for any injury, damage, or defect, permanent or temporary that may be
caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion
Polymer) and any rechargeable battery/batteries. Please have a basic
understanding of the batteries you are using and how to care for them